- A lumtermi thlalang
- Greenhouse thlalang
- Ti kholhnak thlalang
- Railings Glass
- Ti kholhnak kulhnak thlalang
- Padel Court Glass
- Basketball board thlalang
- Ice Hockey Glass
- French innka le thlalang thlalang
- A rong aa cawhmi thlalang, a rong aa dawhmi a lumtermi thlalang
- Glass Veranda , Glass Sliding Panels
- Patio khuhnak thlalang
- Laminated glass
- A lumtermi thlalang
- Thlalang thlalang
- Hmanthlak Hmanthlak
- A lummi thlalang
0102030405
Mah duhning in remh khawhmi le aa dawh ngaimi Printing Glass
Cakuat kan kuat, a rauh hlan ah lehnak na hmuh lai. Zeibantuk thlalang dah na duh ti kha chiah, a ngan le a zat a ttha deuh caah a rauh hlan ah man cazin kan in pek lai. Hmanthlak le file na ngeih ahcun Email nih na caah a tha deuh lai. Email: info@dingsen-industry.com
Paint glass" cu a tlangpi in hmanmi biafang a si i, a tlangpi in suaimi thlalang kha a chim duhmi a si. A phunphun in rong, suaisam, asiloah hmanthlak an hmanmi thlalang thilri asiloah a cunglei kha a chim duhmi a si.
| Cauk chuahnak thlalang | |
| A luangmi thlalang phun | A mark |
| A chahmi tuar khawhnak | ±0.2mm |
| Shouhhlua | 1.Thilthuam chiahnak innka 2.Cupboard innka board Innchung thilri board |
| Pungsaan | Kili ngei thil |
| A par | Thlalang thlennak |
| Ka order | 100M2 |
| Mah duhning in ngan le hme | A si |
| Chawlehnak hmelchunhnak | Aw thlalang |
| Mah duhning in sermi logo | A si |
| Thil chiahnak | Cauk, PE zukcawl, Cork mat cu thlalang karlak ah |
| Phorhmi thilri | Himnak Plywood bawm chiahnak |
| Mah duhning in sermi thilri chiahnak | A si |
| Hramthoknak | Qinhuangdao, China |
| Tilawng dinhnak: | Qinhuangdao tilawng dinhnak asiloah Tianjin tilawng dinhnak |
| A man | FOB asiloah CIF |
| Phaisa Peknak Nawlbia: | T/T |
| Warranty: | Kum 2-10 |
| Phun: | Thinhunnak a ngei lomi |
| Pek khawhnak | Pek khawhnak: Nikhat ah 75 tons |
| Hruainak Caan: | Order fehter hnu ni 15 chungah |
| Cazin asiloah hneksaknak report: | CE EN-12150-2:2004,CAN CGSB 12.1-2022 , ANSI Z97.1-2015(R2020), CPSC 16 CFR 1201-2024 . |
Thazaang tthanchotermi
LYD GLASS nih Printing Glass sernak ah A-grade float glass lawng a hman.
1. Tuchan rong-na thim khawhmi rong phun 12 cu timhcia an si. A ceumi rong panga a um, a rangmi rong pali le a senmi rong pakhat he aa dang.
2. A tuar khawhnak- kan thlalang nih a hleiin lumnak a doh khawh caah lumnak a sangmi khaan hna, rawldawr le ti kholhnak tbk ah hman awk ah a ttha.
3. Glass hmanmi-a fiangmi a luangmi thlalang asiloah a fiang tukmi a luangmi thlalang, a lumtermi thlalang. laminated thlalang. thlalang pahnih.
4. A tthenthum in suaimi thiamnak
5.A ttha tukmi thil tuah khawh i zuam tikah a chung i a ummi rong hna i an ceunak cu thlalang rong hna nakin a sang deuh
Screen printing thlalang hmannak
1.Thilthuam chiahnak innka
2.Cupboard innka board
Innchung thilri board
Cabinet innka, thlalang le innka.
Tempered glass cu a fekmi thing bawm asiloah thir kuang chungah chiah a si lai i kan tempered glass cu American (CAN CGSB 12.1-2022, ANSI Z97.1-2015(R2020) le CPSC 16 CFR 1201-2024) le European standards (CEEN-1201-2015:2020) he aa tlak.
- A sang deuhmi himnak
Thatnak
A linmi thlalang, a lum in hmanmi le a hleiin mei in khanghmi ceramic frit thlalang aa telmi nih, hmannak phunphun caah hman khawhmi thilri ah a sertu ṭhatnak phunphun a pek. Hi ṭhatnak hna hi ṭhen hna u sih:
I. Dawhnak le suaisamnak tthatnak:
Rikhiah um lomi suaisamnak tuah khawhnak:
Rong phunphun: Ron paohpaoh cu hmuh khawh a si, a fekmi a fiang lomi rong in a ceumi rong, duhning in sermi pantones le thir thlennak tiang.
Pattern le hmanthlak phunphun: A harmi pattern, a fiang lomi suaisam, logo, cafang, le a ttha ngaimi hmanthlak hmanthlak hmanh (a hlei in digital ceramic printing he) aa telter khawh.
A muisam: Hmanthlak nih a muisam a chap khawh asiloah a senmi, a ceumi, asiloah satin a ser khawh, hmuh khawhnak le tawngh khawhnak a tthanter khawh.
Hnulei ceunak tthatnak: A ceumi hnulei hmanthlak asiloah hmelchunhnak sernak caah hmanmi a si.
A ttha tein fonh: A um cangmi thilthuam, minthannak, asiloah innsaknak kongkau hna kha ttha tein aa tlakter khawh.
Hmuh khawhmi: A sawhsawh mi thlalang kha a tthawngmi le zuksuai thilri ah a thlen, hmun asiloah thilri dawhnak a tthanchoter.
Pumpak le Ceunak Uknak:
A fiang lomi hmanthlak: Hmuh khawhnak tling a kham, pumpak sinak tling a pek (tahchunhnak ah, spandrel thlalang, ti kholhnak khaan tthennak, zung tthennak).
Translucent/Patterned: Ceunak a luhter i direct hmuhnak a thuh, a karhmi ceunak le hmuh khawhmi tthennak a ser.
Ceunak Tlawmternak: Ni ceunak in a chuakmi ceunak fakpi kha a zorter khawh i ceunak kha tling tein a kham khawh lo.
Minthannak le Hmelchunhnak: Chawlehnak le mipi umnak hmun ah company hmelchunhnak, minthannak thilri, lam kawlnak hmelchunhnak, asiloah thilthuam hmanthlak pawl langhternak caah a ttha tukmi thilri.
II. Riantuannak le Riantuannak tthatnak (A bik in mei in suaimi thlalang):
A hlei in a fekmi le a saumi (Mei in suaimi thlalang cu a ttha deuh):
Hliamhma le Hliamhma Doh khawhnak: Voikhat mei in khangh hnu ah, ceramic rong cu thlalang he aa fonh, a har tuk i hliahcang, tthencheunak le a tlangpi in hmanmi le rawhnak kha a doh khawh. Mah cu a cunglei ah hmanmi vinyl asiloah a lummi rong hna nakin a ttha deuh ngai.
UV Tthawnnak: Ron pawl cu zungzal in an i fonh i a nungmi an si lo, cu nih cun UV radiation he caan saupi um ruangah a rawkmi, a rawkmi, asiloah a rong aa thlengmi hna kha a doh khawh hna. Mah nih hin dawhnak tthatnak cu kum hra chung a hmun lai ti a hngalhter.
Chemical doh khawhnak: Thianhnak thilri, acid, alkalis le thil thurhnawm tam deuh nih a luh khawh lo caah a donghnak hrawh loin thianh le zohkhenh a fawi.
Ti a doh khawhnak: Ti le nikhua nih a luh khawh lo, a cunglei ah hling asiloah hling a karh lonak hnga le ti a ummi pawngkam (tahchunhnak ah, ti kholhnak, rawldawr) ah caan saupi riantuan khawhnak a tuah.
Lungthawhnak Riantuannak (Mei in Hmanmi Thlalang):
Khuasik a doh khawhnak: A lin tukmi aa thleng lengmangmi kha a thleh, a tlong, asiloah a thleh lo in a tuar khawh, cu nih cun lenglei innsaknak hmannak (ni ceunak a hmuhnak hmun), meihol innka le a dang lum tuknak pawngkam caah aa tlakmi a siter.
Thazaang ttha tein hman khawhnak (Spandrel Glass): Spandrel thlalang bantuk in hman tikah, a fiang lomi inn saknak thilri (insulation, inncung tliknak, HVAC system tibantuk) kha tlanglangawngka zar chung ah a thuh, cu nih cun innchung lumnak a khuhnak le a dihlak in thazaang ttha tein hman khawhnak ah a bawmh i cu hmun hna in lumnak a kalmi kha a kham.
Himnak le Himnak:
A rawkmi/zohkhenh lo: A rawkmi asiloah a rawkmi ruangah a man a fakmi rong suai ṭhan asiloah remh a herhnak a zorter.
A thurhnawm lomi/a kang kho lomi: Mei in khanghmi ceramic rong pawl cu a nungmi an si lo, a thurhnawmmi an si lo, cun meikanghnak a chuah tikah meikhu asiloah meikhu a karhter lo caah mipi le pumpak inn caah a himmi thimnak a si.
Structural Integrity: Sealants (spandrel hmannak ah) caah a fekmi pehtlaihnak cunglei a pek hnanak thawngin system cheukhat hna i an dirhmun tthatnak kha a ṭhanchoter.
Zohkhenh Fawi: A nemmi, a tlong lomi cunglei cu a tlangpi in hmanmi thlalang thianhnak in thianh a fawi, thurhnawmhnak le thurhnawmhnak a doh.
III. Hmannak-A hleiin ṭhatnak:
Inn sakning: Inn hmai, spandrel panel, puanzar vampang, innchung tthennak, hnulei tliknak, ti kholhnak kharnak, balustrades, le inncung caah hmanmi, dawhnak le riantuannak tthatnak pahnih a pek.
Mawtaw: Hmai thlalang (frit bands), a kam thlalang, le hnulei thlalang ah dawhnak caah, UV khamnak caah le aa hngatmi hri pawl thuh awkah hmuh khawh a si.
Thilri: A fekmi, dawhnak le thianh a fawimi caah oven innka, meikhu cung, le fridge panel caah hmanmi a si.
Hmelchunhnak le langhternak: A fekmi le hmuh khawhmi hmelchunhnak le langhternak hnulei a ser.
Zuksuai le Kutthiamnak: Zukcawl thiam pawl kha a hmunmi, a nungmi le a hmunmi thlalang zukcawl ser khawhnak nawl a pek hna.
A tawinak in chim ahcun, rong suaimi thlalang ṭhatnak, a hleiin a fekmi mei in khanghmi ceramic phun, cu aa tluk lomi dawhnak phunphun he caan saupi rianṭuan khawhnak, fek tein um khawhnak le zohkhenhnak tlawmte he fonh khawhnak ah a um, cu nih cun a harmi innsaknak, mawṭaw, le thilri, cun thilthuam hmannak caah a ṭha deuhmi thimnak a siter.
Hmanthlak suaimi thlalang, a bik in mei in khangh mi ceramic frit thlalang nih hin thilri phunphun a pek i cu nih cun thilri phunphun a hman khawh i rian a ttuan khawh. A biapi bikmi sining hna cu hihi an si:
I. Dawhnak le suaisamnak sining:
Vast Color Palette: Ron phunphun in hmuh khawh a si, a tlingmi in a ceumi tiang, Pantone he aa tlakmi, thir rong, le a ceumi thil hna.
A phunphun in suaisam le hmanthlak: A harmi suaisam, a fiang lomi suaisam, geometric muisam, cafang, hmelchunhnak, le a ttha ngaimi digital hmanthlak pawl a langhter khawh.
Aa thleng khomi Opacity/Translucency: A tlingmi a si kho (hmuhnak vialte a kham), a fiangmi (ceunak a onh nain hmuhnak a thuh), asiloah a tlawmpal a fiangmi (tahchunhnak ah, a fiangmi hmun a ngeimi silk-screened pattern).
A cunglei thlennak phunphun: A senmi, a tleumi, satin, asiloah a ttha ngaimi tthennak a hmuh khawh, tawngh khawhnak le hmuh khawhnak thuknak a chap khawh.
Branding & Customization: Branding, company sining, aa dangmi zuksuai biachim, asiloah lam kawlnak thilri hna caah fawi tein remh khawh a si.
Hnulei ceunak pek khawhnak: Hnulei ceunak ttha tein hman khawhnak ding caah sermi a si, hmelchunhnak, vampang, asiloah langhternak ah khuaruahhar thil a chuahter.
II. Riantuan ning le a fekmi sining (A bik in mei in suaimi thlalang):
A hlei in a fekmi: Voikhat mei in khangh hnu ah, ceramic rong cu thlalang cunglei ah tthen khawh lomi ah a cang, a rawkralnak le a rawkralnak ah a hlei in a doh khawh.
A fakmi hliah le hliah doh khawhnak: A cawhmi ceramic tthen cu a har tuk, cucaah nifatin hmannak asiloah thianhnak in hliah, hliah, le hliah a doh khawh.
UV Tthawnnak: Ultraviolet (UV) ceunak in a rawk kho lomi, rong pawl kha a nung pengmi le caan a hung rauh deuh tikah a rawk lo, a rawk lo, asiloah a rong aa thleng lo ti kha a hngalhter.
Thermal Shock Resistance: A fak tukmi le a rang tukmi lum thlennak kha a cheu, a thleh, asiloah a thleh loin a tei khawh nakhnga sermi a si.
Khuasik a tuar khawhnak: A lin tukmi kha a rawk loin a tuar khawh, cu nih cun khuasik caan ah oven innka asiloah lenglei hmai tibantuk hmannak caah aa tlakter.
Chemical dohnak: A tlangpi in thianhnak thilri, acid, alkalis, le pawngkam thurhnawmhnak hna kha a doh khawh ngai, zohkhenhnak a fawiter i nun saunak a pek.
Ti le Ti a doh khawhnak: A tlong lomi le ti a luh khawh lomi, rong suaimi cung ah hling, hling, asiloah ti rawhralnak a kham.
A kang kho lomi: Thilnung a si lomi thilri a si caah, ceramic rong nih meikanghnak a karhter lo asiloah meikangh a chuah tikah a thurhnawmmi meikhu a chuahter lo.
Zohkhenhnak tlawm: A nemmi, a tlong lomi le chemical a doh khomi a cunglei ruangah a tlarimi thlalang thianhnak thilri hna he thianh a fawi.
III. Riantuannak le hmannak-thleidannak:
Pumpak Konglam Uknak: Hmuh khawhmi pumpak konglam phunphun a pek, a fiang lomi in a karhmi ceunak thlahnak tiang, tthencheunak, ti kholhnak screen, asiloah zung tthennak caah a ttha.
Ceunak Karhternak le Ceunak Tlawmternak: A ceumi asiloah aa dawhcah lomi thlalang nih ni ceunak a karhter khawh, ceunak a zorter i ceunak cu a luhter rih.
Spandrel he aa tlaknak: Aa khatmi thlalang hmailei hnulei ah a fiang lomi inn saknak thilri (tahchunhnak ah, inncung tliknak, lumternak, HVAC system) thuh awkah tlanglangawngka zar ah spandrel thlalang bantukin hman a si tawn.
Structural Adhesion: Spandrel hmannak caah, ceramic frit cunglei nih hin innchungkhar silicone sealants caah a ttha bikmi pehtlaihnak a pek tawn, cucu innchung thilri himnak le tthatnak caah a biapi tukmi a si.
A Fawimi Hmunhma: A thuh lomi thlalang he aa lo tein a tlaih i a chiah, a hlankan in a dih cangmi dawhnak tthatnak he.
Himnak Thlalang Thimnak: A ttha deuhmi hnahnawhnak doh khawhnak le a himmi rawhnak pattern caah himnak thlalang (a lumtermi asiloah laminated suaimi thlalang) chuah khawhnak ding caah lumter asiloah laminating tuahnak he fonh khawh a si.
Hi thilri hna nih hin hmanthlak suaimi thlalang cu hmannak phunphun caah a ttha tukmi le a hmunmi a siter, a thar in sakmi innchung thilri hna in innchung thilri dawhternak le riantuannak sang thilri hna tiang.
Glass industry ah kum 15 leng hmuhtonnak a ngeimi thiamsang zuarnak phu kan ngei. Chanthar thilri nih kan cawtu hna kha rang tein kuat khawhnak le kan riantuanpi hawi pakhat cio sinah thilri tling tein kuat khawhnak ding caah fek tein quality control khawhnak a kan bawmh. Customers hmasa bik ah, teinak hmuh khawhnak riantuan ttinak.
